Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Model
AM-S1

Item specifics

Vacuum
100KPA
Frequency
2.2khz ( deep skin)
Frequency
4.5Khz (middle layer)
Frequency
6.0 Khz (surface layer)

Review

Description

Ce Approved Spa Use Portable Oxygen jet peel Facial Machine 
Skin Tightening
Spray Oxygen Teratment 
Spray Oxygen Teratment function:
supply oxygen treatments and moisture for the skin rapidly,smooth skin,lightening stains,improve chlorosis,dull conditions,make skin rosy,white,transparent,tender,tightening indeed,with special spa oils will be better. 

Inject Oxygen Treatment 
Inject Oxygen Treatment function:
through the high pressure inject oxygen,activating the activity of skin cells and improve the metabolism of skin cells,and anti-aging,whitening,cured dark cycles,acne,to improve sensitive skin 

Bio-photon electricity Treatment
BIO Treatment
Mechanism:
BIO sine wave work handle has calming,soothing and firming effect, shirnk pores,soothopain and reduce the swelling  excrete by the process of metabolism, and the vessal and nurve will not be damaged. 

Skin Tightening
Spray Oxygen Process 
1. MIX 2-3 drip SPA essential oil diluted with purified water into small cup of the oxygen sprayer,water should be about 2/3 of the cup,and then tightly.Oxygen sprayer can only with liquid products,other states product will cause pinhole jam. 
2. Set work time.The system default time is 30 minutes.Click on the “30”once to increase 10 minutes.The range is 1-120 minutes,15-20 minutes each part. 
3. Click on the oxygen injection to return to the interface of operation.  

BIO-Photon Electricity Process 
1. Click on “Bio-Photon electricity” enter interface. 
2. Apply gel or essence on treatemt area. 
3. Set work time.20 minutes each part. 
4. The system default is “Bio-electricity”,and the output steps is 1. 
5. Click on "Cooling Photon”enter interface.The system default mode is P1,P1(slow)to P4(quick) is piusemode,P5 is constant mode.  

Inject Oxygen Process 
1. Click on “Inject Oxygen”enter interface. 
2. Set work time.About 20 minutes for facial treatment,eye-care for about 15 minutes,the body part about 20 minutes. 
3. Set frequency.The system default frequency is 5 Hz. 
4. Oxygen injector has four working caps,choose appropriate caps according to different treated parts. 

BIO Operation Process
1. Click on“BIO”enter interface. 
2. Set work time.10 minutes each part. 
3. Clean and apply gel or essence on treatment area. 
4. Set BIO intensity.The system default intensity is 1,the range is 1(weak)-10(strong). 
Product Paramenters
Input Voltage
AC 220V/50Hz AC110V/60Hz
Frequency 
2.2khz ( deep skin)
Output power
135VA
Frequency
4.5Khz (middle layer)
Ambient temperature
5°C~+40°C
Frequency 
6.0 Khz (surface layer)
Vacuum
100KPA
Display
Touch Screen