Professional Portable 2 In 1 Hifu 4d Face Lift Hifu Skin Tightening Beauty Machine
- Model
- AM-4D-HIFU
Item specifics
- Product Name
- 4D HIFU 2 in 1
- Input voltage
- AC110V - 220V
- Output frequency
- 4-7MHz
- Output power
- 10-200W
Review
Description
4D HIFU Working principle
Ultrasound focusing uses its unique high-energy focused ultrasound to reach the SMAS layer, enhances the SMAS fascia suspension, and comprehensively solves the problem of sagging and relaxation of the face. It precisely positions the ultrasonic energy to the subcutaneous 4.5mm fascia layer. The muscle layer of the membrane is pulled and pulled to achieve the best effect of shaping, lifting and firming. It acts on the collagen layer of 3mm under the skin to rejuvenate the collagen and achieve aging problems such as skin elasticity, whitening, wrinkle removal and pore removal. At the same time, because the energy is swept across the epidermis, there is no need to worry about the injury of the epidermis, and the skin can be quickly lifted, tightened, and smoothed to smooth wrinkles!
Radar engraving is the use of mechanical radar waves for good tissue penetration, accurately transferring 65 to 72 degrees of thermal energy to the skin's SMAS layer, 1.5 epidermis, 3.0 dermis, 4.5 fascia, 4.5 collagen (other A), 13 fat layer, 8.0 shape, produce heat coagulation, shrink skin, regenerate collagen. In addition, radar can be carved through the fat layer (depth 8mm ~ 13mm) for body treatment of obesity and chest.
A variety of treatment heads effectively stimulate fibroblasts to split new cells at 40 times per second, dissolve facial fat cells, tighten skin contours, repair damaged fibrous tissue, stimulate collagen cell regeneration, and quickly achieve the effect of thin face and tight Q-bomb. At the same time, the precise positioning of the radar wave can actively identify the fat cells, and reach the depth of the target through a unique probe friction treatment/treatment, so that the patient does not feel pain.
Technical Advantages
1.4D two modes: switch between fast mode or slow mode.
2.4D can be used for 1 to 12 lines with a maximum energy area width of 11mm. The corresponding parameters can be adjusted according to the size of the skin area, the operation time is greatly shortened, the energy point of the skin is more uniform, and the curative effect is better.
3.4D uses the most advanced high-tech technology, according to the facial skin condition with two treatment heads, the precise effect of different skin depth, the energy of treatment over the epidermis, 100% without any damage.
At the same time, the depth of the skin treated by the treatment head is consistent with the set value, ensuring the customer's painless and comfortable.
4. The thermal effect of dermal collagen and collagen fibers is both heat-stimulated on the fat layer and fascia layer (SMAS), and the therapeutic effect is far better than that of Hot Maggie.
5. The operation is simple and convenient. No need for consumables, which greatly saves on treatment costs.
6. Immediately after treatment, the effect of tightening and shaping can be seen. A treatment can be maintained for at least 18--24 months, and the skin age is increased once a year.
7. Apply makeup immediately after treatment, without affecting normal life and work.
8. The accurate depth of the mechanical radar wave: the energy gathers in the deep part of the tissue, and has no effect on the surface skin. On the one hand, it has a deep effect, on the other hand, it better protects the surface skin
9.The radar engraving method uses the cymbal circle method, and the method of concentrating the energy of the treatment part by using the cymbal circle method to evenly reach the energy of each part to obtain a better effect, and the pain is less than that of the previous HIFU instrument. .
10. Radar engraving is operated by shortening the interval of energy emission, because the treatment interval is short, it can be operated frequently, and the effect can be obtained in a shorter time.
11. Radar engraving Compared with the original HIFU instrument, the new probe is used to make the operation more precise.
Specification ：
|
Product Name |
4D HIFU 2 in 1
|
Input voltage
|
AC110V - 220V
|
|
Output frequency
|
4-7MHz
|
Output power
|
10-200W
|
|
Insurance wire
|
5A
|
Air box size |
31 × 44 × 50cm
|
|
Weight
|
11.2kg (excluding the base) |
Base size
|
73 × 51 × 17cm
|
